• Model NO.：R7C0GW12I
• FPC Width：10mm
• Lumens：1500lm,M for 5000K
• Min. Cut：100mm
• Transport Package：Carton Packaging
• Specification：50M per roll
• Trademark：MYNICE,Neutral,OEM,ODM
• Origin：China
• HS Code：9405409000
• Production Capacity：1, 000, 000m,Month

Basic Info.

Model NO. R7C0GW12I FPC Width 10mm Lumens 1500lm/M for 5000K Min. Cut 100mm Transport Package Carton Packaging Specification 50M per roll Trademark MYNICE/Neutral/OEM/ODM Origin China HS Code 9405409000 Production Capacity 1, 000, 000m/Month

Product Description

220V AC high voltage 2835 SMD 120LEDs/meter flexible led strip lights
Application
It is used in indoor and outdoor landscape lighting, architectural lighting, decorative lighting, groove lighting, showcase lighting, yacht and ship lighting, contouring and other scenes.

Main features
- Using customized reinforced LED bracket, strong stability, low light decay.
- New type of rolled copper process, good heat dissipation and strong conductivity.
- Environmental protection grade silicone hollow extrusion, waterproof grade IP67.
- Single-ended power supply 50 meters, no brightness differencebetween the beginning and the end.
- No need LED driver, easy to install.


Main Parameters
Product size 50000*12*4.5 mm
Cut-able unit 100mm
LED pitch 8.3 mm
LED quantity 120 LEDs/m
Max. cascade length 50 m
Min. bend diameter 20 mm
Mounting solution 3M tape
Operating ambient -25ºC~120ºC
Storage environment -25ºC~60ºC / 60% RH


Photometrical data


Optical illuminance parameters

Product wiring diagram

Package

Instructions
- Installation of LED modules (with power supplies) needs to be made under consideration of all valid regulations and norms.
- Installation by qualified electrician only.
- Please drive the led strip with isolated power, and the ripple of the constant voltage source should be less than 5%.
- Please do not bend the strip into an arc with a diameter less than 20mm to ensure the longevity and reliability.
- Do not fold it in case any damage of LED beads.
- Do not pull the power wire hard to ensure the longevity. Any crash may damage the colloidal surface is prohibited.
- Please make sure the wire is connected to the anode and cathode correctly. The power output should be consistent with the
voltage of the strip to avoid damage.
- LED lights should be stored in dry, sealed environment. Please only unpack it before usage. Ambient temperature: -20 ºC ~ + 40
ºC.Storage temperature: -25 ºC ~ + 60 ºC/60%RH.
- Please use the strips without waterproof within indoor environment with humidity less than 70%.
- Please be careful during operation. Do not touch the AC power supply in case of electric shock.
- Please leave at least 20% power for the power supply during using to ensure there is enough power supply to drive the product.
- Do not use any acid or alkaline adhesives to fix the product (e.g.: glass cement).