How to remove the central control of the old Fit? Detailed disassembly steps and precautions
In recent years, with the rise of car modification culture, many car owners have begun to try to disassemble and assemble the center console themselves, especially owners of older Honda Fits (such as GD3/GE8). This article will combine the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed disassembly guide for the old Fit central control, along with relevant tools and precautions.
1. Popular car modification topics on the Internet in the past 10 days
| Ranking | hot topics | Discussion popularity |
|---|---|---|
| 1 | Old Fit central control upgraded with CarPlay | high |
| 2 | Frequently asked questions about DIY disassembly of central control | Middle to high |
| 3 | Low cost modified car audio | in |
2. List of tools required to disassemble the old Fit central control
| Tool name | Quantity | Instructions for use |
|---|---|---|
| Plastic pry bar set | 1 set | Avoid scratching the interior |
| Phillips screwdriver | 1 handful | Remove the fixing screws |
| 10mm socket wrench | 1 | Remove the air conditioning panel bracket |
| electrical tape | 1 volume | Mark wire harness |
3. Detailed disassembly steps
Step 1: Remove the center console
1. Use a plastic spudger starting from the passenger side and gently pry open the buckle along the edge of the center console.
2. Note that there are hidden screws under the air conditioner knob, which need to be removed first.
3. There are 6 buckles on the entire panel, which need to be applied evenly.
Step 2: Remove the audio host
1. After exposing the host frame, use a screwdriver to remove the 4 fixing screws.
2. When unplugging the wiring harness at the rear of the host, you need to press the buckle first.
3. Record the line sequence or take photos with your mobile phone for easy restoration.
Step 3: Remove the air conditioning control module
1. Remove the 2 10mm bracket nuts.
2. Carefully pull out the air volume control cable.
3. The temperature adjustment cable has a positioning slot, please pay attention to the angle.
4. Precautions
| Things to note | Reason explanation |
|---|---|
| Disconnect the negative terminal of the battery | Prevent short circuit from burning the insurance |
| Preheating is required for winter operation | Plastic parts are easy to break at low temperatures |
| keep all screws | Fit uses various specifications of screws |
5. Frequently Asked Questions
Q: What should I do if there are abnormal noises after disassembly?
A: Check whether all buckles are fully reset. It is recommended to replace the aging buckles.
Q: How to upgrade the central control screen?
A: You need to purchase a special adapter cable, and some models need to modify the bracket.
6. Modification suggestions
According to the recent popular modification trends, the following upgrade plans are recommended:
1. Install a CarPlay module (about 500-800 yuan)
2. Replace the tweeter (the most obvious improvement in sound quality)
3. Install USB fast charging module
The disassembly method provided in this article is applicable to the second/third generation Fit (GD3/GE8 models) from 2003 to 2013. It is recommended to cooperate with the maintenance manual during actual operation. If you encounter difficulties, you can refer to the real-life tutorials on recent popular video platforms, or join the Fit rider group to exchange experiences.
check the details
check the details
en
