How to heat a stone pot: Hot topics and practical guides on the entire network in the past 10 days
As a common cooking tool in the kitchen, stone pots are widely loved for their good insulation and even heat. However, how to heat the stone pot correctly is a confusion for many people. This article will combine popular topics and hot contents on the Internet for the past 10 days to explain in detail how to heat a stone pot and provide practical suggestions.
1. Discussions related to the hot topics on the entire network in the past 10 days
| Hot search keywords | Discussion hot topic | Main focus |
|---|---|---|
| How to heat a stone pot | high | How to avoid cracking of stone pot |
| Bibimbap | middle | Temperature control tips for stone pots |
| Stone pot maintenance | high | Cleaning and storage precautions |
| Stone pot material | middle | The heating differences between stone pots of different materials |
2. The correct way to heat a stone pot
1.Open flame heating: Suitable for gas stoves or induction cookers. Place the stone pot on the fire source, preheat it over low heat for 3-5 minutes, and then gradually adjust to medium heat or high heat. Avoid using high heat directly to prevent the stone pot from cracking due to excessive temperature difference.
2.Heating the oven: Put the stone pot into the oven, set the temperature to 150°C-200°C, and preheat for 10-15 minutes. Note that the stone pot cannot be taken out directly from the oven and put into cold water, otherwise it will easily break.
3.Microwave heating: Some stone pots can be heated in a microwave oven, but it is necessary to confirm whether the material of the stone pot is suitable. The heating time is recommended to be controlled at 1-2 minutes to avoid overheating.
3. Precautions for heating stone pot
| Things to note | reason | Solution |
|---|---|---|
| Avoid quenching and heat | The material of stone pot is prone to cracking due to temperature difference | Keep the temperature smoothly before and after heating |
| Don't burn it in vain | Empty burning may cause deformation or damage to the stone pot | Add a small amount of water or oil when heating |
| Choose the right fire source | Stone pots of different materials have different requirements for fire source | Select heating method according to the instructions |
4. Frequently Asked Questions about Heating of Stone Pots
1.Why does the stone pot crack after heating?
The main reason is that the temperature changes too quickly, resulting in uneven stress inside the stone pot. It is recommended to gradually heat up during heating to avoid direct contact with cold water.
2.Can water be added when heating a stone pot?
Yes, but it should be noted that the amount of water should not be too much, and it should be added after preheating the stone pot to avoid cracking due to too large temperature difference.
3.How to clean the stone pot after heating?
After waiting for the stone pot to cool naturally, wash it with a soft cloth or sponge, avoiding the use of a hard brush or detergent.
5. Summary
The correct heating method of a stone pot can not only extend its service life, but also improve the cooking effect. Through the introduction of this article, I believe you have a deeper understanding of the techniques and precautions for heating stone pots. Whether it is heating in an open flame, oven or microwave, the key is to control the temperature and avoid sudden heat. Hope these practical suggestions will help you better use the stone pot and enjoy delicious dishes.
check the details
check the details
en
